PBUCH S.A. GDYNIA, Poland
PBUCH S.A. since 1952 has been a leading supplier of the tailor made refrigeration and air-conditioning systems for marine and industrial applications and pressure tanks for wide variety of fluids and solids. In scope of supply is included: technical design, manufacturing, testing and approval procedures, installation. We offer new installations as well as repairs, modernization of existing installations, refrigerant replacement, services.
condensing unitsHVACair conditioning unitair receivers and pressure vesselsboilers and heating breathing apparatuscompressors, aircondenserscoolingcooling and heatingcooling water heat exchangerdiesel engine starting airdiving and underwatereductorsfire fightingfresh water boilerfuel oilfuel oil pre-heaterheat exchangersheaters, tube and shellheating systemsmedical equipmentmeteomilitaryoffshoreoffshore equipmentpower supplyrefrigerantsrefrigerationrefrigeration componentsrefrigeration plant and equipmentresuscitators and equipmentspecial ballastssteamtankstanks, liquid gastanks, stainless steeltoolstubes, heat exchanger
Bulk TanksCUChillerCrude oil pressure vesselCrude oil stabilization reboilerCrystallizersDecompression chamberGarbage cooling unit HYDROPHORE UNITS, Domestic Fresh Water ModuleMAC Module for physical multidimensional observation and under-water recognitionPressure tanks for CO2SPRSPRZSUBCOOLERS TYPE DShell and tube heat exchangers with bimetal pipes Starting air receiverSteam oil heatherVacuum DryerWATER RESISTORWCHWCUZHZHRZVZVR
Presentation: www.pbuch.equip4ship.com
Address: Poland, GDYNIA, 81-963 Hutnicza 4
Contact person: Department Head of Commerce and Marketing Emilia Weglewska ,e-mail, website
Phone: +48 58 6695720; +48 58 6695731
Fax: +48 58 6633424
Mobile: +48 602389816
VERTICAL RECEIVERS TYPE ZV
Send enquiry
For accumulation and storage the refrigerants
-Capacity: 5-40dm3, etc.
-Refrigerants:R22, R134a, R404A, R507, R407C (other for a request)
-For marine and land applications
-Approval: LRS, GL, DNV, BV, PRS, RMRS, RINA, ABS, CCS, UDT, TÜV, WDT, CE
-Capacity: 5-40dm3, etc.
-Refrigerants:R22, R134a, R404A, R507, R407C (other for a request)
-For marine and land applications
-Approval: LRS, GL, DNV, BV, PRS, RMRS, RINA, ABS, CCS, UDT, TÜV, WDT, CE
ZV
SHELL AND TUBE CONDENSERS TYPE SPR
Send enquiry
For condense refrigerants in refrigeration and air-conditioning plants
-Refrigerants:R22, R134a, R404A, R507,R407C (other for a request)
-For marine and land applications.
-Approval: LRS, GL, DNV, BV, PRS, RMRS, RINA, ABS, CCS, UDT, TÜV, WDT, CE
-Refrigerants:R22, R134a, R404A, R507,R407C (other for a request)
-For marine and land applications.
-Approval: LRS, GL, DNV, BV, PRS, RMRS, RINA, ABS, CCS, UDT, TÜV, WDT, CE
SPR
SHELL AND TUBE CONDENSERS TYPE SPRZ
Send enquiry
For condense and storage refrigerants in refrigeration and air-conditioning plants
-Refrigerants:R22, R134a, R404A, R507,R407C
-For marine and land applications.
-Approval: LRS, GL, DNV, BV, PRS, RMRS, RINA, ABS, CCS, UDT, TÜV, WDT, CE mark
-Refrigerants:R22, R134a, R404A, R507,R407C
-For marine and land applications.
-Approval: LRS, GL, DNV, BV, PRS, RMRS, RINA, ABS, CCS, UDT, TÜV, WDT, CE mark
SPRZ
SUBCOOLERS TYPE D
Send enquiry
For subcooling of the liquid refrigerant with the aid of vapour from the evaporator.
The increasing of cooling capacity is done exact by that way.
Subcoolers are designed for service in freonia-devices.
For marine and land applications
The increasing of cooling capacity is done exact by that way.
Subcoolers are designed for service in freonia-devices.
For marine and land applications
SUBCOOLERS TYPE D
VERTICAL RECEIVERS TYPE ZVR
Send enquiry
For accumulation and storage the refrigerants
-Capacity: 63-5000dm3, etc.
-Refrigerants:R22, R134a, R404A, R507,R407C (other for a request)
-For marine and land applications.
-Approval: LRS, GL, DNV, BV, PRS, RMRS, RINA, ABS, CCS, UDT, TÜV, WDT
-Capacity: 63-5000dm3, etc.
-Refrigerants:R22, R134a, R404A, R507,R407C (other for a request)
-For marine and land applications.
-Approval: LRS, GL, DNV, BV, PRS, RMRS, RINA, ABS, CCS, UDT, TÜV, WDT
ZVR
HORIZONTAL RECEIVERS TYPE ZH
Send enquiry
For acumulation and storage the refrigerants
-Capacity: 5-40dm3, etc.
-Refrigerants:R22, R134a, R404A, R507,R407C (other for a request)
-For marine and land applications.
-Approval: LRS, GL, DNV, BV, PRS, RMRS, RINA, ABS, CCS, UDT, TÜV, WDT, CE
-Capacity: 5-40dm3, etc.
-Refrigerants:R22, R134a, R404A, R507,R407C (other for a request)
-For marine and land applications.
-Approval: LRS, GL, DNV, BV, PRS, RMRS, RINA, ABS, CCS, UDT, TÜV, WDT, CE
ZH
HORIZONTAL RECEIVERS TYPE ZHR
Send enquiry
For accumulation and storage the refrigerants
-Capacity: 5-40dm3, etc.
-Refrigerants:R22, R134a, R404A, R507,R407C (other for a request)
-For marine and land applications.
-Approval: LRS, GL, DNV, BV, PRS, RMRS, RINA, ABS, CCS, UDT, TÜV, WDT, CE
-Capacity: 5-40dm3, etc.
-Refrigerants:R22, R134a, R404A, R507,R407C (other for a request)
-For marine and land applications.
-Approval: LRS, GL, DNV, BV, PRS, RMRS, RINA, ABS, CCS, UDT, TÜV, WDT, CE
ZHR
CONDENSING UNITS TYPE WCU
Send enquiry
For operation in refrigerating and air-conditioning installations.
Refrigerants:R22, R134a, R404A, R507,R407C (other for a request)
For marine and land applications
Refrigerants:R22, R134a, R404A, R507,R407C (other for a request)
For marine and land applications
WCU
CHILLER
Send enquiry
CHILLER 350kW was designed for cooling of technological water for air-conditioning system on-board. Presented unit fulfill all necessary requirements which are vital for battleships and is made in accordance with rules for shock absorbers.
Chiller
GARBAGE COOLING UNIT
Send enquiry
Cooling unit used for garbage cooling system. Unit is fitted with silencing housing, build-in control board.
Presented unit fulfill all necessary requirements which are vital for battleships and is made in accordance with rules for shock absorbers.
Presented unit fulfill all necessary requirements which are vital for battleships and is made in accordance with rules for shock absorbers.
Garbage cooling unit
Shell and tube heat exchangers with bimetal pipes
Send enquiry
Shell and tube heat exchangers with outside ribbed bimetal pipes.
The inner part of the pipes, which is in contact with the sea water is cupronickel while the outside part of the pipes which is in contact with ammonia made of steel.
The inner part of the pipes, which is in contact with the sea water is cupronickel while the outside part of the pipes which is in contact with ammonia made of steel.
Shell and tube heat exchangers with bimetal pipes